need some help finding a tonneau that will still fit even with my chrome bed rails. I can't seem to find anything. Thanks for any help

__________________
99 4.0 4x4, amazon green, cowl hood, billet grill,clear corners, brush guard w/ KC lights, chrome side step bars,chrome bed rails,diamond tailgate protector, Lightrider tonneau cover, euro tailights ,FIPK K&N air intake,Gibson exhaust, bbk throttle body, Granetelli mass air flow.

Nice decal!

__________________
98 xlt, dropped 3/5. 17in. CHROME Cobra wheels wrapped in 255/50/17, billet grille, dumped flowmaster 40 series, clear corners, euro tails, indiglo guages, TWEED Interior, painted interior, silver flame pinstripe, 5% Limo tint all around, K&N, Viper alarm, 60/40 to bucket conversion, 4.10 gears
SOLD 10/29/03!!!!!!!!!!!!!!!!!!!!

2003 Dodge SRT4


Mopar Stage 1 | Mopar STS | BDJ's exhaust | HKS SSQ BOV | IPP CAI | ATP Upp | Autometer pillar pod with dual gauges | DC sports Strut bar | 9007 PIAA Extreme whites | Eurolite 893 Fog lights | Titan turn signals | Clear side markers | Intercooler Neon | Viper emblem | Exel Ennio wheels | MM inserts | Catch Can | Custom racing stripes |More to come.

Im not sure that they offer one. However you can get one of thos leather/plastic ones that stretch over the bed and spend some extra time on it. To do it i would think you could just remove the bedrails... install the toneau... then bolt the rails back on through the toneau. Good luck.

PS... where did that sticker come from?

__________________

2002 Mustang GT
Mods: Aftermarket Tint, K&N. Air Silencer Removal, Painted Calipers, American Thunder Flowmaster Catback, Mach 1 chin spoiler.

I wouldnt bolt the rails onto the tonneau. On my cover, there is 4 rails that go around the front , sides, and tailgate of the truck. bolting anything onto them would not be a smart idea because they are not that sturdy

Justin...I am guessing he had it made somewhere.

__________________
98 xlt, dropped 3/5. 17in. CHROME Cobra wheels wrapped in 255/50/17, billet grille, dumped flowmaster 40 series, clear corners, euro tails, indiglo guages, TWEED Interior, painted interior, silver flame pinstripe, 5% Limo tint all around, K&N, Viper alarm, 60/40 to bucket conversion, 4.10 gears
SOLD 10/29/03!!!!!!!!!!!!!!!!!!!!

2003 Dodge SRT4


Mopar Stage 1 | Mopar STS | BDJ's exhaust | HKS SSQ BOV | IPP CAI | ATP Upp | Autometer pillar pod with dual gauges | DC sports Strut bar | 9007 PIAA Extreme whites | Eurolite 893 Fog lights | Titan turn signals | Clear side markers | Intercooler Neon | Viper emblem | Exel Ennio wheels | MM inserts | Catch Can | Custom racing stripes |More to come.

I was referring to the ones that use the snap on pieces. Its kinda a stretchy plastic one... idk never had one, always wanted one... oh well.

__________________

2002 Mustang GT
Mods: Aftermarket Tint, K&N. Air Silencer Removal, Painted Calipers, American Thunder Flowmaster Catback, Mach 1 chin spoiler.

Rangerman24 I found a flush fitting tanneau cover that sits inside the bedrails with very little actually on them it may fit. It is made by Slim Top you can check it out at www.TRUCKACC.com, Or give California Cocepts at 1-888-292-4388, hope this helps you out I'll look for some others.

__________________
"Foolish man give wife grand piano,
Wise man give wife upright organ."

Here is a pic of the cover, what do you think.

__________________
"Foolish man give wife grand piano,
Wise man give wife upright organ."

what chenny said is the only way to go. i have seen sliding ones but most of them you gotta go over the rails behind the cab.

nice truck.

__________________
1999 F-150 AirRaid, 4.10 gears, tint, superchip, see my gallery for more.

I used to have an F150 with a hard cover. I had the same chrome rails. I just bolted them to the top of the hard cover and it worked great.

ok thanks guys I'll check that stuff out. The decals I did myself I just bought a lettering from pep boys and did it. I was gonna put www. in front of it but the letttering kit only came with two w's.

__________________
99 4.0 4x4, amazon green, cowl hood, billet grill,clear corners, brush guard w/ KC lights, chrome side step bars,chrome bed rails,diamond tailgate protector, Lightrider tonneau cover, euro tailights ,FIPK K&N air intake,Gibson exhaust, bbk throttle body, Granetelli mass air flow.